×

Menu

Index

Search

Activating the Heat Recovery Loop on the Chilled Water Loop

Given a Chilled Water Loop, the HRL can be enabled through the Heat recovery loop tab within the chilled water loop settings.

Figure: Enabling the Heat Recovery Loop on the Chilled Water Loop

The contents of Activating the Heat Recovery Loop on the Chilled Water Loop

HR loop

Reference

Mode

Configuration on CHWL

Configuration on HWL

Heat-pump/heat-recovery receipient loop

Location of inlet on CHWL:

Heat Acquisition-Rejection Coil

Heat-pump or heat recovery chiller

Autosize

Cooling Capacity

Heating Capacity

Design chilled water flow rate

Design chilled water temperature difference (delta-T):

Design/minimum chilled water supply temperature

Design condenser water flow rate | Design HX load-side hot water flow rate

Design condenser water temperature difference (delta-T) | Design HX load-side temperature difference (delta-T)

Design hot water loop supply temp. (discharge on recipient loop) | Design / max hot water supply temp (discharge of recipient loop) | Design hot water loop supply temp. (HX discharge on reipient loop) | Design / max hot water loop supply temp. (HX discharge on recipient loop)

Design condenser entering water temperature | Design HX load-side entering water temperature

Chilled water pump

Condenser water loop

Condenser water pump