Design condenser entering water temperature | Design HX load-side entering water temperature

This input specifies the entering water temperature (from the HWL return) into the condenser side of the HRC. When Mode is set to Heating-driven input is read-only and references the difference between the Deisgn hot water supply temperature and the Design hot water temperature difference.

When the condenser water loop is enabled this input becomes Design HX load-side entering water temperature. Similar to Design condenser entering water temperature, this input specifies the entering water temperature to the HX from the HWL return.

When Mode is set to Pre-cool & pre-heat this input is editable.