Design condenser water flow rate | Design HX load-side hot water flow rate
The design condenser water flowrate displays the condenser side of the heat recovery loop flowrate. This is the side the goes from theHRCto the HWL.TheDesign condenser water flow rate is editable when the Mode is pre-cool & pre-heat and references the fraction of the HWL flow seen by the HRC condenser as the default input. When the Mode is heating-driven this input is uneditable.
Enabling the condenser water loop will change this input to Design HX Load-side hot water flow rate. This specifies the flowrate on the HWL side of the heat exchanger.
