Design condenser water temperature difference (delta-T) | Design HX load-side temperature difference (delta-T)
The Design Condenser Water Temeprature difference (delta-T) is directly linked to the HRC’sDesign Condenser Water Flow Rate where modifying one will modify the other to maintain the heating capacity.
If heating capacity is adjusted via the capacity section abovem the Design condenser water temperature difference (delta-T) will be held constant, and the Design condenser water flowrate will be recalculated accordingly
When the HRL is configured in parallel with the HWL (i.e. Mode = Heating-driven), the Design condenser water temperature difference (delta-T) becomes read-only. In this case, it will reference the Design HWLtemperature difference associated with the recipient HWL.
In contrast, when the HRC is configured in series, the Design condenser water temperature difference (delta-T) becomes ediable and operated independently of the HWL inputs.
When the condenser water loop is enabled, this input become Design HX load-side temperature difference (detla-T) and displays the differential temperature across the HWL side of the heat exchanger.
