6.1.6.2.27.1 Attributes Defined Here
branches
|
(list) DHW branches
|
cold_water_inlet_temperature_set_point_profile
|
(string) Cold water inlet temperature set point profile ID if setpoint type is profile, None otherwise
|
cold_water_inlet_temperature_set_point_type
|
|
cold_water_inlet_temperature_value
|
(float) DHW cold water inlet temperature value if setpoint type is constant, None otherwise
|
condenser_heat_recovery
|
|
condenser_heat_recovery_pre_heat_used
|
(bool) Whether a condenser heat recovery heat exchanger is used for DHW pre-heat. True or False if explicit mode, None otherwise.
|
condenser_water_loop
|
|
design_cold_water_inlet_temperature
|
(float) DHW design cold water inlet temperature if explicit mode, None otherwise
|
dhw_design_supply_temperature
|
(float) DHW design supply temperature if explicit mode, None otherwise
|
dhw_design_supply_temperature_set_point_profile
|
(string) DHW design supply temperature set point profile ID if explicit mode and setpoint type is profile, None otherwise
|
dhw_design_supply_temperature_set_point_type
|
|
dhw_design_supply_temperature_set_point_value
|
(float) DHW design supply temperature set point value if explicit mode and setpoint type is constant, None otherwise
|
dhw_model
|
|
heat_source
|
|
is_to_be_autosized
|
(bool) Whether the DHW flow rate is to be autosized. True or False if explicit mode, None otherwise.
|
solar_water_heater
|
|
solar_water_heater_pre_heat_used
|
(bool) Whether a solar water heater is used for DHW pre-heat. True or False if explicit mode, None otherwise.
|