Cooling Coil (Chilled Water)
Chilled Water Cooling Coil Input Dialog
- Type : Select the type of cooling coil. Options are Chilled Water or Direct Expansion.
- Inlet FluidSeg : Defines the inlet/supply-side fluid segment of hydronic coils.
- Outlet FluidSeg : Defines the outlet/return-side fluid segment of hydronic coils.
- Rated Gross Capacity (Btu/h): The gross total (both sensible and latent) cooling capacity of a cooling coil or packaged DX system at Air Conditioning, Heating, & Refrigeration Institute AHRI) rating conditions. The gross capacity is the total cooling capacity without adjustments for fan heat.
- Design Flow Rate (gpm): The rate of water moving through the coil.
- Bypass Min Efficiency check? : Selecting this option triggers an Exceptional condition to be shown on the compliance report and requires code reviewers to manually check that the equipment meets the minimum efficiency requirements of the applicable equipment category in the Standards. This option should only be selected if the equipment category of the system in the proposed design is not supported by the combination of Type/SubType or the equipment was manufactured prior to a change in equipment efficiency Standards and does not meet current efficiency requirements, but it is still legal to install
- Pressure Drop : The pressure drop through the coil at design conditions