Figure 82 – Hot Water Heating Coil Input Dialog
Input Summary:
· Type : Select the type of heating coil. Options are Resistance, Furnace, HeatPump, and HotWater.
· Inlet FluidSeg : Defines the inlet/supply-side fluid segment of hydronic coils.
· Outlet FluidSeg : Defines the outlet/return-side fluid segment of hydronic/steam coils.
· Bypass Min Efficiency check? : Selecting this option triggers an Exceptional condition to be
shown on the compliance report and requires code reviewers to manually check that the
equipment meets the minimum efficiency requirements of the applicable equipment
category in the Standards.
· Pressure Drop : The pressure drop through the coil at design conditions
Capacity section
· Gross Capacity : The gross heating capacity of the coil at AHRI conditions without adjustments for fan heat
· Flow Rate : The design water volume flow rate (gpm) through the coil
